OVERVIEW
Description
Virginia Diodes offers compact converters (CCs) for frequency up and down-conversion. These converters are easy to use and well suited for high performance up and down conversion of wide band modulated millimeter-wave signals. VDI CCs offer full waveguide band coverage and are available from WR28 (22.5-40 GHz) to WR2.2 (330-500 GHz) with additional CCs under development. Compact converters can typically be delivered within 9-11 weeks ARO or less. Contact VDI for more information.
Due to the double sideband nature of the CCUs, two sidebands (upper and lower sidebands) are generated during the upconversion process. A filter may be preferred for certain applications to eliminate one sideband. Click here for more information about our band pass filters.
VDI also offers waveguide amplifiers to boost the transmitted signal power out of the up-converter. Click here for more information about our amplifiers.
Compact Converter Configurations
Compact Up-Converter (CCU)
Compact Down-Converter (CCD)
PRODUCTS
Compact Converters
Product Specifications for Compact Converters (CC)
|
| Waveguide Band |
RF
Frequency (GHz) |
Up-Converter |
Down-Converter |
LO Harmonic Factor |
LO Input Frequency
(GHz) |
LO Connector |
Intrinsic Mixer SSB Conversion Loss
(dB, typ.)† |
Input Power (~P1dB / ~P0.1dB) |
Maximum IF Frequency (GHz) |
| WR19 |
40-60 |
WR19CCU-B |
WR19CCD-B |
2 |
20-30 |
2.92mm(f) |
9 |
+5 / -5 |
9 |
| WR15 |
50-75 |
WR15CCU-B |
WR15CCD-B |
2 |
25-37.5 |
2.92mm(f) |
10 |
+5 / -5 |
9 |
| WR15CCU-B-M4 |
WR15CCD-B-M4 |
4 |
12.5-18.75 |
2.92mm(f) |
10 |
+5 / -5 |
9 |
| WR12 |
60-90 |
WR12CCU-B |
WR12CCD-B |
2 |
30-45 |
2.4mm(f) |
10 |
+5 / -5 |
12 |
| WR12CCU-B-M4 |
WR12CCD-B-M4 |
4 |
15-22.5 |
2.92mm(f) |
10 |
+5 / -5 |
12 |
| WR10 |
75-110 |
WR10CCU-B |
WR10CCD-B |
4 |
18.8-27.5 |
2.92mm(f) |
10 |
+5 / -5 |
15 |
| WR8.0 |
90-140 |
WR8.0CCU |
WR8.0CCD |
4 |
22.5-35 |
2.92mm(f) |
10 |
-1 / -11 |
15 |
| WR6.5 |
110-170 |
WR6.5CCU |
WR6.5CCD |
6 |
18.3-28.3 |
2.92mm(f) |
10 |
-1 / -11 |
17 |
| WR6.5CCU-M4 |
WR6.5CCD-M4 |
4 |
27.5-42.5 |
2.92mm(f) |
10 |
-1 / -11 |
17 |
| WR6.5CCU-M12 |
WR6.5CCD-M12 |
12 |
9.2-14.2 |
2.92mm(f) |
10 |
-1 / -11 |
17 |
| WR5.1 |
140-220 |
WR5.1CCU |
WR5.1CCD |
6 |
23.3-36.7 |
2.92mm(f) |
11 |
-1 / -11 |
22 |
| WR4.3 |
170-260 |
WR4.3CCU |
WR4.3CCD |
6 |
28.3-43.3 |
2.92mm(f) |
11 |
-1 / -11 |
26 |
| WR3.4 |
220-330 |
WR3.4CCU |
WR3.4CCD |
6 |
36.7-55 |
1.85mm(f) |
12 |
-1 / -11 |
40 |
| WR3.4CCU-M12 |
WR3.4CCD-M12 |
12 |
18.3-27.5 |
2.92mm(f) |
12 |
-1 / -11 |
40 |
| WR2.2 |
330-500 |
WR2.2CCU |
WR2.2CCD |
12 |
27.5-41.7 |
2.92mm(f) |
14 |
-7 / -17 |
40 |
*LO Input Power for optimal conversion loss varies with LO input frequency.
†Conversion Loss is defined as the intrinsic mixer conversion loss without any external amplifiers.
General Notes:
•VDI CCs include a single volt power supply.
•The required LO power for optimal performance varies across the frequency band. Performance specifications assume optimal RF and LO power coupled into the mixer; performance may be reduced near band edges.
•Conversion Loss performance is specified at ~1 GHz IF. Conversion loss increases as a function of IF, at a rate of ~1.5dB/10GHz, up to the specified Maximum IF Frequency. Performance is typical with reduced performance at band edges.
•RF Filters can be used to eliminate one sideband of the CCR RF output. Contact VDI for more information.
•RF amplifiers can be used to increase the CCU RF output power. Contact VDI for more information.
•Where available, an input isolator will smooth the required LO input power vs. frequency.
General Specifications for Compact Converters (CC)
|
| Description |
Specification |
Connector |
| LO Input Port (Typical / Damage) |
WR19 (Not -B) |
0-3 dBm / 6 dBm |
See
Compact Converter Product Manual
for Detail |
| WR15 (Not -B) |
0-6 dBm / 9 dBm |
| WR12 (Not -B) |
0-6 dBm / 9 dBm |
| WR10 (Not -B) |
6-12 dBm / 15 dBm |
| WR19 to WR10 (-B Only) |
0-6 dBm / 9 dBm |
| WR8.0 to WR2.2 |
0-6 dBm / 9 dBm |
| WR3.4CCU/CCD-M12 |
0-6 dBm / 15 dBm |
|
IF Input Power Damage Limit (CCUs)†
RF Input Power Damage Limit (CCDs)†
|
WR19 |
6 dBm |
2.92mm (f) |
| WR15 to WR10 (Not -B) |
0 dBm |
2.92mm (f) |
| WR15 to WR10 (-B Only) |
12 dBm |
2.92mm (f) |
| WR8.0 to WR3.4 |
6 dBm |
2.92mm (f) |
| WR2.2 |
0 dBm |
2.92mm (f) |
| IF Frequency |
CCU |
~10 MHz (min.) |
- |
| CCD |
~100 kHz (min.) |
- |
| RF Test Port |
VDI Precision Flange |
WR15 and Higher Frequency |
UG-387/UM |
| WR28 to WR19 |
UG-599/UM |
| Default E-Field Polarization |
WR28 to WR10 (Not -B) |
Horizontal |
- |
| All Others |
Vertical |
- |
| IF Amplifier Gain (dB)†† |
For CCDs Only |
~12 dB |
- |
| AC Inputs |
Single-Volt Power Supply
(+9V / 4A) |
100-240VAC. 3.5A,
50-60Hz |
U.S. or E.U. |
| Maximum Weight |
- |
2.0 Lbs. (0.91 Kg.) |
- |
|
Dimensions
(Enclosure, without Connectors)
L x W x H
|
WR28 to WR10
(Not including CCU-B and DDC-B Modules)
|
3.75" x 3.00" x 1.50" |
- |
All Others
|
5.00" x 3.50" x 1.50" |
- |
| Operating Temperature |
Typical / Recommended |
25°C / 20-30°C |
- |
†The IF Input Damage Limit (for CCUs) and the RF Input Damage Limit (for CCDs) are the same. The IF Connector is specified here. The RF
Test specifications are listed separately in the table above.
††CCD modules include an IF amplifier with ~12dB gain.
Contact [email protected] for more information.
RESOURCES
Product Manuals and Specifications
Mechanical Drawings
Current Drawings WR19:
Current Drawings WR15 to WR10 (not -B Modules):
[Applies to Serial Numbers: CCU 167 and higher, CCD 108 and higher]
Current Drawings WR8.0 to WR2.2 and -B Modules for WR15 to WR10:
